The ioLogik E1200 industrial remote Ethernet I/O has two embedded Ethernet switch ports that allow information to flow to another local Ethernet device or connect to the next ioLogik in the daisy-chain. Applications such as factory automation, security and surveillance systems, and tunnel monitoring, can make use of daisy-chained Ethernet for building multi-drop I/O networks over standard Ethernet cables. Many industrial automation users are familiar with the multi-drop configuration typically used in fieldbus applications. The daisy-chain function on the remote Ethernet I/O ioLogik E1200 not only increases the connection between machines and panels, but also lowers the cost of buying separate Ethernet switches, and at the same time reduces labor fees and cabling by a large percentage. For example, if a production facility contains 700 stations (20 points per station), the wiring cost reduction can reach 15% of the total implementation cost.

• Built-in 2-port Ethernet switch for daisy-chain topologies
• Free support of Moxa's push-based Active OPC Server Lite
  
  • Seamlessly connect to any SCADA system
  • Save 80% on network bandwidth
  • I/O response that's seven times faster
• User-defined Modbus/TCP addressing
• MXIO programming library for Windows and WinCE VB/VC.NET and Linux C APIs
• Web configuration with Import/Export function

LAN:
Ethernet	2 x 10/100 Mbps switch ports, RJ45
Protection	1.5 KV magnetic isolation
Protocols	Modbus/TCP, TCP/IP, UDP, DHCP, Bootp, HTTP
Digital Input:
Sensor Type	NPN, PNP, and Dry contact
I/O Mode	DI or Event Counter
Dry Contact	Logic 0: short to GND Logic 1: open
Wet Contact	Logic 0: 0 to 3 VDC Logic 1: 10 to 30 VDC (DI COM to DI)
Isolation	3K VDC or 2K Vrms
Counter/Frequency	250 Hz, power off storage
Relay Output
Contact Rating	5 A @ 30 VDC, 5 A @ 250 VAC, 5 A @ 110 VAC
Inductance Load	2 A
Resistance Load	5 A
Breakdown Voltage	500 VAC
Relay On/Off Time	1500 ms (Max.)
Initial Insulation Resistance	1G min. @ 500 VDC
Expected Life	100,000 times (Typical)
Initial Contact Resistance	100 milli-ohms (Max.)
Pulse Output	0.3 Hz at rated load
Type	Form A (N.O.) relay outputs, 5A
Power Requirements
Power Consumption	130 mA typical @ 24 VDC
Power Input	24 VDC nominal, 12 to 36 VDC
Physical Characteristics:
Dimensions	27.8 x 124 x 84 mm (1.09 x 4.88 x 3.31 in)
Wiring	I/O cable max. 14AWG
Environmental Limits:
Operating Temperature	-10 to 60°C (14 to 140°F)
Storage Temperature	-40 to 85°C (-40 to 185°F)
Ambient Relative Humidity	5 to 95% (non-condensing)
Regulatory Approvals
EMI	FCC Part 15, CISPR (EN55022) class A
EMS	IEC 61000-4, IEC 61000-6
Shock	IEC 60068-2-27
Freefall	IEC 60068-2-32
Vibration	IEC 60068-2-6
Warranty:
Warranty Period	2 years

Specification

Power Requirements
Power Consumption	188 mA @ 24 VDC
Power Input	24 VDC nominal, 12 to 36 VDC
Inputs and Outputs
Digital Inputs	6 channels
Relay Outputs	6 channels
Relay Output
Type	Form A (N.O.) relay outputs, 5A
Initial Insulation Resistance	1G min. @ 500 VDC
Initial Contact Resistance	30 milli-ohms (Max.)
Contact Rating	5 A @ 30 VDC, 5 A @ 250 VAC, 5 A @ 110 VAC
Expected Life	100,000 times (Typical)
Inductance Load	2 A
Resistance Load	5 A
Pulse Output	0.3 Hz at rated load
Breakdown Voltage	500 VAC
Relay On/Off Time	1500 ms (Max.)
LAN
Protection	1.5 KV magnetic isolation
Ethernet	2 x 10/100 Mbps switch ports, RJ45
Protocols	Modbus/TCP, TCP/IP, UDP, DHCP, Bootp, HTTP
Digital Input
Isolation	3K VDC or 2K Vrms
Dry Contact	• On: short to GND • Off: open
Wet Contact	• On: 0 to 3 VDC • Off: 10 to 30 VDC
Counter Frequency	250 Hz, power off storage
I/O Mode	DI or Event Counter
Sensor Type	Wet Contact (NPN or PNP), Dry Contact
Environmental Limits
Operating Temperature	Standard Models: -10 to 60°C (14 to 140°F) Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature	-40 to 85°C (-40 to 185°F)
Ambient Relative Humidity	5 to 95% (non-condensing)
MTBF (mean time between failures)
Time	808,744 hrs
Database	Telcordia (Bellcore)
Physical Characteristics
Weight	under 200 g
Dimensions	27.8 x 124 x 84 mm (1.09 x 4.88 x 3.31 in)
Wiring	I/O cable max. 14 AWG
Standards and Certifications
EMI	FCC Part 15 Subpart B Class A
Safety	UL 508
Shock	IEC 60068-2-27
Vibration	IEC 60068-2-6
EMS	IEC 61000-4, IEC 61000-6
Freefall	IEC 60068-2-32
Warranty
Warranty Period	2 years
Details	See www.moxa.com/warranty

If you need accessory information for this product, please use our Online Contact Us Form to reach us, our industrial sales team is here to help you find the accessories.

Download DataSheet