Moxa Mfg Mini-Store
Active Ethernet I/O with 4 analog inputs and 12 configurable DIOs
Product Page @ Moxa Site MOXA Major LinesMfg Part Number: ioLogik E2242 , Item #: 709398
Image may not reflect the actual item.
Price: $737.76
Quantity:
In Stock: 4
In Stock: 4
No Sales Tax except these states
, PO and Wire.
Better I/O matrix for monitoring
Moxa's ioLogik E2242 is tailor made for use with remote monitoring and alarm systems. This Active Ethernet I/O product provides 4 analog inputs and 12 configurable DIOs in the same product. The 1:3 ratio of analog to digital IOs is perfectly adapted for water tank monitoring and environmental monitoring applications, in which 1 analog input is used to trigger 3 digital outputs as High-High, High, and Low alarms. Moxa's ioLogik E2242 lets you set up your monitoring system without the need for a local PC or RTU.
Features and Benefits
- 4 fixed differential analog input channels
- 12 configurable digital input/output channels
- Instant event messaging by TCP, UDP, e-mail, SNMP Trap
- PC-based configuration utility and web console
- Easy-to-use Click&Go™ Logic for local output control
- I/O control over Modbus/TCP and SNMP protocol
- NIST traceable calibration
| LAN: | |
| Ethernet | 10/100Mbps, RJ45 |
| Protection | 1.5KV magnetic isolation |
| Protocols | Modbus/TCP, TCP/IP, UDP, DHCP, Bootp, SNMP(MIB for I/O and Network), HTTP, SNTP |
| Serial: | |
| Interface | RS-485-2w: Data+, Data-, GND |
| Serial Line Protection | 15KV ESD for all signals |
| Serial Communication Parameters: | |
| Data Bits | 8 |
| Stop Bits | 1 |
| Parity | None |
| Flow Control | None |
| Protocols | Modbus/RTU |
| Speed | 1200 to 115200 bps |
| Digital Input: | |
| Sensor Type | NPN, PNP |
| I/O Mode | DI or event counter (up to 900 Hz) |
| Dry Contact | Logic 0: short to
GND Logic 0: Open |
| Wet Contact | Logic 0: 0 to 3 VDC Logic 1: 10 to 30 VDC |
| Common Type | 6 points per COM |
| Power Off Storage for Counter Mode | Yes |
| Digital Output: | |
| Sensor Type | Sink, 36 VDC, 200 mA |
| Pulse Wave Width | 10 ms /100 Hz |
| Configurable Digital Input/Output Channels: | |
| Channels | 12 points |
| Analog Input: | |
| Resolution | 16-bit |
| Accuracy | ±0.1% FSR @ 25?C, ±0.3% FSR @ -10 and 60?C |
| Sampling Rate (all channels) | 100 samples/sec |
| Input Impedence | 200K ohms (min.) |
| Built-in Resistor for Current Input | 102 ohms |
| Channels | 4, differential input |
| Physical Characteristics: | |
| Wiring | I/O cable max. 14AWG |
| Environmental Limits: | |
| Operating Temperature | -10 to 60°C (14 to 140°F) |
| Storage Temperature | -40 to 85°C (-40 to 185°F) |
| Ambient Relative Humidity | 5 to 95% (non-condensing) |
| Power Requirements: | |
| Power Input | 24 VDC nominal, 12 to 48 VDC |
| DO Power | 24 VDC nominal, up to 30 VDC |
| Agency Approvals: | |
| EMI | FCC Part 15, CISPR (EN55022) class A |
| EMS | IEC 61000-4, IEC 61000-6 |
| Safety | UL508 |
| Shock | IEC 60068-2-27 |
| Freefall | IEC 60068-2-32 |
| Vibration | IEC 60068-2-6 |
Specification
| Power Requirements | |
| Power Consumption | 178 mA @ 24 VDC |
| Power Input | 24 VDC nominal, 12 to 36 VDC |
| Serial Communication Parameters | |
| Flow Control | None |
| Protocol | Modbus/RTU |
| Data Bits | 8 |
| Parity | None |
| Stop Bits | 1 |
| Baudrate | 1200 to 115200 bps |
| Analog Input | |
| Type | Differential input |
| Input Impedance | 200K ohms (min.) |
| Built-in Resistor for Current Input | 120 ohms |
| Resolution | 16 bits |
| Input Range | ±150 mV, 0 to 150 mV, ±500 V, 0 to 500 mV, ±5 V, 0 to 5 V, ±10 V, 0 to 10 V, 0 to 20 mA, 4 to 20 mA |
| Sampling Rate (all channels) | 100 samples/sec |
| Accuracy | ±0.1% FSR @ 25°C ±0.3% FSR @ -10 and 60°C |
| I/O Mode | Voltage / Current |
| Inputs and Outputs | |
| Analog Inputs | 4 channels |
| Configurable DIOs | 12 channels |
| LAN | |
| Protection | 1.5 KV magnetic isolation |
| Ethernet | 1 x 10/100 Mbps, RJ45 |
| Protocols | Modbus/TCP, TCP/IP, UDP, DHCP, Bootp, SNMP, HTTP, CGI, SNTP |
| Digital Input | |
| Isolation | 3K VDC or 2K Vrms |
| Poweroff Counter | Supports poweroff counter storage function |
| Common Type | 6 points per COM |
| Over-voltage Protection | 36 VDC |
| Digital Filtering Time Interval | Software selectable |
| Dry Contact | • On: short to GND • Off: Open |
| Wet Contact | • On: 0 to 3 VDC • Off: 10 to 30 VDC |
| Counter Frequency | 900 Hz, power off storage |
| I/O Mode | DI or event counter |
| Sensor Type | Wet Contact (NPN or PNP) and Dry Contact |
| Environmental Limits | |
| Operating Temperature | -10 to 60°C (14 to 140°F) |
| Storage Temperature | -40 to 85°C (-40 to 185°F) |
| Ambient Relative Humidity | 5 to 95% (non-condensing) |
| Physical Characteristics | |
| Weight | under 250 g |
| Dimensions | 115 x 79 x 45.6 mm (4.53 x 3.11 x 1.80 in) |
| Wiring | I/O cable max. 14 AWG |
| Standards and Certifications | |
| EMI | FCC Part 15 Subpart B Class A, EN 55022 Class A |
| Safety | UL 508 |
| Shock | IEC 60068-2-27 |
| Vibration | IEC 60068-2-6 |
| EMS | IEC 61000-4, IEC 61000-6 |
| Freefall | IEC 60068-2-32 |
| Digital Output | |
| Type | Sink |
| Isolation | 2K Vrms or 3K VDC (Magnetic) |
| Pulse Output Frequency | 1 kHz |
| Over-temperature Shutdown | 175°C (min.) |
| Over-voltage Protection | 45 VDC |
| Current Rating | 200 mA per channel |
| I/O Mode | DO or Pulse Output |
| Over-current Protection | 2.6 A (4 channels @ 650 mA) |
| Serial Communication | |
| Interface | RS-485-2w: Data+, Data-, GND |
| Serial Line Protection | 15 KV ESD for all signals |
| MTBF (mean time between failure) | |
| Time | 204,391 hrs |
| Database | Telcordia (Bellcore) |
| Warranty | |
| Warranty Period | 5 years |
| Details | See www.moxa.com/warranty |
