TRIPP LITE 

Tripp Lite SmartPro 1000RM1U UPS


Mfg Part Number:  SMART1000RM1U  
Image may not reflect the actual item.
Price: $681.66 + Free Shipping
Quantity:
In Stock: 1094
Last Updated: Mar 27, 2024
No Sales Tax except these states
, PO and Wire.
Main Specification
General Information
ManufacturerTripp Lite
Manufacturer Part NumberSMART1000RM1U
Manufacturer Website Addresshttp://www.tripplite.com
Brand NameTripp Lite
Product LineSmartPro
Product NameSmartPro 1000RM1U UPS
Product TypeLine-interactive UPS
Technical Information
Plug/Connector TypeNEMA 5-15P
Receptacles6 x NEMA 5-15R
Emergency Power OFFYes
Cord Length10 ft
Power Description
Load Capacity (VA)1 kVA
Load Capacity (Watt)640 W
Input Voltage110 V AC
Output Voltage120 V AC
Waveform TypeSine Wave
Management
Network ManagementSNMP Manageable
AlarmOverload
AlarmOn Battery
AlarmLow Battery
Controls/Indicators
Status Indicators5 front panel LEDs - Green POWER LED, 3 color BATTERY CHARGE LED, 3 color OUTPUT LOAD LEVEL LED, red BATTERY WARNING LED.
Interfaces/Ports
USBYes
Total Number of Expansion Slots1
Battery Information
Battery ChemistrySealed Lead Acid
Backup/Run Time (Full Load)10 Minute
Backup/Run Time (Half Load)24 Minute
Battery Life6 Year
Maximum Battery Recharge Time4 Hour
Hot SwappableYes
Environmental Conditions
Temperature104°F (40°C)
Physical Characteristics
Height1.8"
Width17.5"
Depth16.8"
Rack Height1U
Weight (Approximate)32 lb
Miscellaneous
Package Contents
  • SmartPro 1000RM1U UPS
  • SMART 1000RM1U UPS System
  • Mounting hardware
  • Cabling for USB & DB9 monitoring and EPO switching
  • PowerAlert unattended shutdown and UPS/Power monitoring software
  • Warranty information and instruction manual
Additional Information
  • SMART1000RM1U line interactive UPS offers battery derived sine wave AC output during power outages, voltage regulation during brownouts and overvoltages, plus network-grade AC surge suppression
  • 1000VA / 640 watt power handling capability with full-time sine wave output offers guaranteed compatibility with networking, telecom and other sensitive electronic devices
  • Supports 1U rackmount installation in 2 or 4 post rack enclosures, upright tower placement also supported
  • Large internal batteries offer runtimes of 24 minutes at half load (500VA / 320 watts) and 10 minutes at full load (1000VA / 640 watts)
  • Maintains regulated 120V nominal output during brownouts and overvoltages from 83 to 147V
  • Includes 6 UPS-supported outlets arranged in 2 individually controllable load banks (2 outlets per bank) that can be powered off and back on again via software interface
  • PowerAlert UPS monitoring and unattended shutdown software enables configurable network broadcast messaging, pager & email notification, event logging and running user-defined script commands
  • Offers simultaneous monitoring by up to 3 directly-connected devices through included USB, DB9 and SNMP* interfaces (*requires optional SNMPWEBCARD), or the monitoring of any number of additional UPS systems over IP with included PowerAlert monitoring software. Free PowerAlert enterprise management software is also available for select opportunies
  • Communications ports support messaging of UPS and line power status, including on-battery, low-battery, power restored, AC line voltage, DC battery voltage and remaining battery capacity
  • Supports timed inverter shutoff after unattended shutdown, activate self-test and UPS output power control for scheduled or immediate reboot of connected devices
  • Supports Tripp Lite's WatchDog software application to restore unresponsive programs by systematically restarting applications, operating systems and ultimately rebooting completely locked computers by momentarily switching UPS power off and back on again (requires optional WATCHDOGSW)
  • Built-in accessory slot supports SNMP with optional SNMPWEBCARD adapter
  • Emergency Power Off (EPO) interface with cable
  • Multi-function audible alarms and set of 5 front panel LEDs
  • Network-grade AC surge suppression
  • Attractive all-black color scheme
  • UPS battery set ships fully assembled and ready for installation, no time consuming connection of internal batteries by user is necessary
  • Two year warranty with $250,000 connected equipment insurance (USA & Canada only)
Certifications & StandardsUL1778 (USA), cUL (Canada), FCC Class A (emissions), NOM (Mexico), Conforms to IEEE 587 / ANSI C62.41 specifications
Warranty
Limited Warranty2 Year
General Information
Power Rating 1000 VA
Output Voltage Rating 120 V
Number of Outputs 6
Runtime-Full Load 10 min
Runtime-Half Load 25 min
MODEL- SMART1000RM1U      VENDOR- TRIPPLITE
 
FEATURES- SmartPro Rack/Tower UPS System- Black finish
       Intelligent, line-interactive network power management system.
       1000VA line interactive 1U rack/tower UPS system with sine wave 
        output in AC and battery mode; 6 outlets arranged in 2 switchable 
        load banks; Simultaneous communications via SNMPWEBCARD slot, USB 
        and DB9 serial ports; Included PowerAlert UPS monitoring software 
        manages an unlimited number of network UPS systems; Corrects 
        brownouts and overvoltages from 83 to 147V; $250,000 Ultimate 
        Lifetime Insurance (USA & Canada only).
       Tripp Lite's SMART1000RM1U intelligent, line interactive rack/tower 
        uninterruptible power supply prevents data loss, downtime and 
        equipment damage due to power outages, voltage fluctuations and 
        transient surges.
       Requires only one rack space (1U) in a standard rack enclosure, with 
        included accessories for upright tower placement. Large internal 
        batteries offer 25 minutes half load runtime and 10 minutes at full 
        load. Maintains regulated 120V nominal output without using battery 
        power during brownouts and overvoltages from 83 to 147V. 1000VA/640 
        watt power handling capability and full time sine wave output 
        offers guaranteed compatibility with networking, telecom and other 
        sensitive electronic applications. 
       Includes a total of 6 outlets arranged in 2 load banks that are 
        individually controllable via software interface to reboot select 
        equipment on demand or automatically shed less significant loads to 
        extend battery runtime for more critical equipment. Supports remote 
        monitoring of UPS and site power conditions via built-in USB and 
        DB9 monitoring ports. Includes PowerAlert UPS monitoring and 
        unattended shutdown software with complete cabling. Built-in 
        accessory slot supports SNMP with optional SNMPWEBCARD adapter. 
       Emergency Power Off (EPO) interface offers option for instantaneous 
        power-off of UPS and connected equipment in the case of fire or 
        emergency situation. Multi-function audible alarms and set of 5 
        front panel LEDs offer at-a-glance notification of UPS and line 
        power status. Network-grade AC surge suppression protects equipment 
        from damage and performance problems resulting from transient 
        surges and line noise. Attractive all-black color scheme.
       Find the TrippLite UPS appropriate for your needs. Try the TrippLite UPS Sizing Guide Today.
   Includes SMART1000RM1U UPS System, Mounting hardware, Cabling for USB & 
     DB9 monitoring and EPO switching, PowerAlert unattended shutdown and 
     UPS/Power monitoring software, Warranty information and instruction 
     manual.
* SMART1000RM1U line interactive UPS offers battery derived sine wave AC 
  output during power outages, voltage regulation during brownouts and 
  overvoltages, plus network grade AC surge suppression.
* 1000VA/640 watt power handling capability with full-time sine wave output 
  offers guaranteed compatibility with networking, telecom and other 
  sensitive electronic devices.
* Supports 1U rackmount installation in 2 or 4 post rack enclosures, 
  upright tower placement also supported.
* Large internal batteries offer runtimes of 25 minutes at half load 
  (500VA/320 watts) and 10 minutes at full load (1000VA/640 watts).
* Maintains regulated 120V nominal output during brownouts and overvoltages 
  from 83 to 147V.
* Includes 6 UPS-supported outlets arranged in 2 individually controllable 
  load banks (2 outlets per bank) that can be powered off and back on again 
  via software interface.
* PowerAlert UPS monitoring and unattended shutdown software enables 
  configurable network broadcast messaging, pager & email notification, 
  event logging and running user-defined script commands.
* Offers simultaneous monitoring by up to 3 directly-connected devices 
  through included USB, DB9 and SNMP* interfaces (*requires optional 
  SNMPWEBCARD), or the monitoring of any number of additional UPS systems 
  over IP with included PowerAlert monitoring software. Free PowerAlert 
  enterprise management software is also available for select opportunies.
* Communications ports support messaging of UPS and line power status, 
  including on-battery, low-battery, power restored, AC line voltage, DC 
  battery voltage and remaining battery capacity.
* Supports timed inverter shutoff after unattended shutdown, activate self-
  test and UPS output power control for scheduled or immediate reboot of 
  connected devices.
* Supports Tripp Lite's WatchDog software application to restore
  unresponsive programs by systematically restarting applications, 
  operating systems and ultimately rebooting completely locked computers by 
  momentarily switching UPS power off and back on again (requires optional 
  WATCHDOGSW).
* Built-in accessory slot supports SNMP with optional SNMPWEBCARD adapter.
* Emergency Power Off (EPO) interface with cable.
* Multi-function audible alarms and set of 5 front panel LEDs.
* Network-grade AC surge suppression.
* Attractive all-black color scheme.
* UPS battery set ships fully assembled and ready for installation, no time 
  consuming connection of internal batteries by user is necessary.
* Two year warranty with $250,000 connected equipment insurance (USA & 
  Canada only).
 
  -- SPECIFICATIONs --------------------------------
OUTPUT- Output volt amp capacity (VA): 1000
         Output watt capacity (watts): 640
               Output nominal voltage: 120V AC sine wave output in AC and
                                        battery mode.
            Output voltage regulation: LINE MODE, Sine wave line voltage 
                                        120V (-21% +8%); BATTERY MODE, Sine 
                                        wave output within 5% of 120VAC.
          Output frequency regulation: LINE MODE, Passes line frequency of 
                                        60Hz +/-10%; BATTERY MODE, Inverter 
                                        output regulated to 60Hz +/-0.5Hz.
                 Outlet quantity/type: (6) NEMA 5-15R output receptacles 
   Custom load management receptacles: Includes 2 load banks, each with 2 
                                        outlets, that support automated 
                                        load shedding and remote reboot on 
                                        demand of locked network devices. 
                                       Configurable via PowerAlert software 
                                        to automatically switch off 
                                        optional loads, like monitors, to 
                                        increase available runtime for 
                                        servers and other critical devices.  
                  Overload protection: 15A input breaker 
INPUT - Maximum input amps/watts: 6.3A/760 watts  
           Input connection type: NEMA 5-15P  
               Input cord length: 10 ft., 14 gauge 
  Recommended electrical service: 15A 120V  
BATTERY- Full load runtime: 10 minutes (640VA) 
         Half load runtime: 25 minutes (320VA) 
         DC system voltage: 24 VDC 
  Typical battery lifespan: 3-6 years, depending on usage 
     Battery recharge rate: 2-4 hours to 90% 
            Battery Access: Hot-swappable batteries are accessible via 
                             battery door.
VOLTAGE REGULATION- 
   Voltage regulation  : Line interactive voltage regulation corrects input
                          voltages between 83 and 147 back to usable 120V
                          nominal levels.
  Overvoltage correction: Input voltages between 128 adn 147 are reduced by
                           12%.
  Brownout correction   : Input voltages between 83 and 105 are boosted by 
                           14%.
LEDS ALARMS & SWITCHES-
  Front panel LEDs: 5 front panel LEDs - Green POWER LED, 3 color BATTERY 
                     CHARGE LED, 3 color OUTPUT LOAD LEVEL LED, red BATTERY 
                     WARNING LED.
            Alarms: 3 function audible alarm indicate: power failure 
                     conditions- 4 short beeps every 10 seconds; overload - 
                     continuous short beeps; and low battery - continuous 
                     tone.
          Switches: Includes 2 front panel mounted push-button switches for 
                     system enable, self-test and alarm cancel functions.
SURGE/NOISE SUPPRESSION-
  AC surge suppression        : 1800 joules
  AC suppression response time: Instantaneous 
  EMI/RFI AC noise suppression: Yes
COMMUNICATIONs - 
    Network monitoring port: Includes 2 built-in monitoring ports, 1 USB & 
                              1-DB9. Each supports on battery, low battery, 
                              power restored, AC line voltage, DC battery 
                              voltage, load percentage, battery charge 
                              current, battery capacity, internal UPS 
                              temperature and line frequency status 
                              messaging. Interface supports timed inverter 
                              shutoff after unattended shutdown, activate 
                              self-test and 10 second reboot of connected 
                              equipment. Supports reboot of all connected 
                              devices at once or individual load banks via 
                              software interface. Compatible with Tripp 
                              Lite's PowerAlert and WatchDog software.
       Software and cabling: Includes USB cable and PowerAlert Software 
         SNMP compatibility: Built-in accessory slot accommodates internal
                              SNMP/Web card and other network accessories.
     WatchDog compatibility: Yes, compatible with Tripp Lite's WatchDog 
                              system service to restore operation to locked 
                              equipment through soft reboot of application/
                              OS or hard power off/on reboot of connected 
                              equipment - ideal for unattended kiosk 
                              applications.
LINE/BATTERY TRANSFER -
  Transfer time from line power to battery mode: 2-4 milliseconds 
          Low voltage transfer to battery power: 83V (resets to line power 
                                                  as line voltage increases 
                                                  to 87V or higher).
         High voltage transfer to battery power: 147V (resets to line power 
                                                  as line voltage decreases 
                                                  to 143V or lower).
EPO PORT   - Includes RJ11 EPO (emergency power off) port and cable.
TVSS GROUND- Includes back panel grounding point with thumbscrew for data 
              line surge suppressors and other network accessories 
              requiring a safe grounding point.
COLD START - Yes, inverter can be "cold started" to enable temporary AC 
              output during a power failure.
MATERIAL   - Steel construction
FORM FACTOR- Supports 1U rackmount installation in in 2 or 4 post racks, 
              rackmount flanges are reconfigurable to support upright tower 
              placement.
COOLING    - Built-in cooling fan
ENVIRONMENT- Operating Temperature: +32 to +104 degrees Fahrenheit  
               Storage Temperature: +5 to +122 degrees Fahrenheit
                 Relative Humidity: 0 to 95%, non-condensing 
          Line mode BTU/hr. (Max.): 55.8 
       Battery mode BTU/hr. (Max.): 189.2
APPROVALS  - UL1778 (USA), cUL (Canada), FCC Class B (emissions), NOM 
              (Mexico).
SIZE- 17.5"w x 1.75"h x 16.75"d          WT.- 32.0 lbs.                     
  www.tripplite.com  

Connector Cables

Mounting Kits

$67.82
Stock: 10635

PDUs

Rack Equipment

$64.99
Stock: 1912

Remote Management Adapters

$338.52
Stock: 22558

Services

Surge Suppressors/Protectors

Temperature & Humidity Sensors

UPS Batteries

$195.70
Stock: 92

[1027] [True] [Yes] [No] [No]

nextwarehouse.com has a Shopper Approved rating of 4.6/5 based on 29303 ratings and reviews.