Moxa  Mfg Mini-Store

8-Port Device Server, 10/100 Ethernet, RS-232, RJ-45 8pin, 15KV ESD, Desktop, 12-48VDC, 110V Power Supply----- OPEN Box *** Open Box Item ***

MOXA Major Lines
Mfg Part Number:  NPort 5610-8-DT-J  
Image may not reflect the actual item.
Price: $683.95
Quantity:
In Stock: 1
No Sales Tax except these states
, PO and Wire.

NPort 5600-8-DT device servers can conveniently and transparently connect 8 serial devices to an Ethernet, allowing you to network your existing serial devices with only basic configuration. You can both centralize management of your serial devices and distribute management hosts over the network.

The NPort 5600-8-DT series is the best choice for applications that need additional serial ports, but for which mounting rails are not available. The NPort 5600-8-DT device servers have a smaller form factor compared to our 19" models.

Convenient design for RS-485 applications
The NPort 5650-8-DT device servers support selectable 1 K? and 150 K? pull high/low resistors and a 120? terminator. In some critical environments, termination resistors may be needed to prevent the reflection of serial signals. When using termination resistors, it is also important to set the pull high/low resistors correctly so that the electrical signal is not corrupted. Since no set of resistor values is universally compatible with all environments, NPort 5600-8- DT device servers use DIP switches to allow users to adjust termination and pull high/low resistor values manually for each serial port.

Convenient power inputs
The NPort 5650-8-DT device servers support both a power terminal block and power jack for ease of use and greater flexibility. Users can connect the terminal block directly to a DC power source, or use the power jack to connect to an AC circuit through an adaptor.

Features:

  • 8 ports supporting RS-232, RS-422, or RS-485 operation
  • Compact desktop size
  • Auto-detecting 10/ 100 Mbps Ethernet
  • 15 KV ESD surge protection for all serial signals
  • Easy IP address configuration with LCM (Liquid Crystal Module)
  • Configuration by web console, Telnet console, and more
  • TCP Server, TCP Client, UDP, and Real COM operation modes
  • Supports SNMP MIB-II for network management
  • Configurable voice alarm for exceptions

Specifications

 LAN
Ethernet
2 10/100 Mbps, RJ45
Protection
Built-in 1.5 KV magnetic isolation
 
 NPort 5610-8-DT Serial Interface
Interface
RJ45
No. of Ports
8
Port Type
RJ45 (8-pin) or DB9 (male)
Signals
TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
 
 NPort 5650-8-DT Serial Interface
Interface
RS-232/422/485
No. of Ports
8
Port Type
RJ45 (8-pin) or DB9 (male)
Signals
RS-232: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
RS-422: Tx+, Tx-, Rx+, Rx-, GND
RS-485 (2-wire): Data+, Data-, GND
RS-485 (4-wire): Tx+, Tx-, Rx+, Rx-, GND
Serial line protection
15 KV ESD for all signals
Isolation
2 KV (NPort 5650I-8-DT)
RS-485 Data Direction
ADDC™ (Automatic Data Direction Control)
 
 Power Line Protection
Burst
4 KV burst (EFT), EN6 000-4-4
Surge
2 KV surge, EN6 000-4-5
 
 Advanced Built-in Features
HMI
LCM display with four push buttons
Buzzer
Yes
Real-Time Clock
Yes
Watch Dog Timer
Yes
 
 Serial Communication Parameters
Parity
None, Even, Odd, Space, Mark
Data bits
5, 6, 7, 8
Stop bit
1, 1.5, 2
Flow control
RTS/CTS, XON/XOFF, DSR/DTR (only for RS- 232)
Transmission Speed
50 bps to 921.6 Kbps
 
 Software Features
Protocols
ICMP, IP, TCP, UDP, DHCP, BOOTP, Telnet, DNS, SNMP, HTTP, SMTP, SNTP, Rtelnet, ARP, RFC2217
Utilities
NPort Administrator for Windows 95/98/ME/NT/2000/XP/2003/Vista
OS Driver Support
Windows 95/98/ME/NT/2000//XP/2003/2003 x64/Vista/Vista x64 Real COM driver/Linux Real TTY driver/SCO Unix/SCO OpenServer 5/OpenServer 6/UnixWare7/UnixWare 2.1/SVR4.2/QNX 4.25/QNX 6/Solaris 10/FreeBSD 5/FreeBSD 6
Configuration
Web Browser, Telnet Console, or NPort Administrator
 
 Power Requirements
Power Input
12 to 48 VDC
Power Consumption
NPort 5610-8-DT: 621 mA for 12V, 140 mA for 48V
NPort 5610-8-DT-J: 621 mA for 12V, 140 mA for 48V
NPort 5650-8-DT: 580 mA for 12V, 156 mA for 48V
NPort 5650I-8-DT: 1066 mA for 12V, 200 mA for 48V
NPort 5650-8-DT-J: 580 mA for 12V, 156 mA for 48V
 
 Mechanical
Material
SECC sheet metal (0.8 mm)
Dimensions (W x H x D)
197 x 135.5 x 44 mm (without ears)
229 x 135.5 x 46 mm (with ears)
197 x 135.5 x 53 mm (with DIN-Rail kit on bottom panel)
Gross Weight
NPort 5610-8-DT: 1.76 kg
NPort 5610-8-DT-J: 1.17 kg
NPort 5650-8-DT: 1.77 kg
NPort 5650I-8-DT: 1.85 kg
NPort 5650-8-DT-J: 1.71 kg
 
 Environmental
Operating Temperature
0 to 55°C (32 to 131°F), 5 to 95% RH
Storage Temperature
-20 to 70°C (-4 to 158°F), 5 to 95% RH
 
 Regulatory Approvals
EMC
CE: EN55022 Class A/EN55024
FCC: FCC Part 15 Subpart B, Class A
Safety
UL: UL60950-1
TÜV: EN60950-1
Warranty
5 years

If you need accessory information for this product, please use our Online Contact Us Form to reach us, our industrial sales team is here to help you find the accessories.

[0] [True] [Yes] [No] [No]

nextwarehouse.com has a Shopper Approved rating of 4.6/5 based on 29297 ratings and reviews.