General Information | |
Manufacturer | CRU Acquisitions Group, LLC |
Manufacturer Part Number | 8511-5009-9500 |
Manufacturer Website Address | http://www.cru-dataport.com |
Brand Name | CRU |
Product Line | DataPort 25 |
Product Model | 8511-5009-9500 |
Product Name | DataPort 25 SATA II Carrier |
Product Type | Drive Enclosure |
Controllers | |
Controller Type | Serial ATA |
I/O Expansions | |
Number of Total Expansion Bays | 2 |
Number of 2.5" Bays | 2 |
Interfaces/Ports | |
Drive Interface | Serial ATA/300 |
Physical Characteristics | |
Form Factor | Internal |
Height | 1" |
Width | 3.1" |
Depth | 5.2" |
Miscellaneous | |
Compatibility |
|
Certifications & Standards |
|
Warranty | |
Limited Warranty | 3 Year |
MODEL- 8511-5009-9500 VENDOR- CRU FEATURES- DataPort 25 SFF Removable Drive Carrier ONLY- Black DP25 Drive-Carrier SATA 3Gb/s, DUAL 3.5" BAY, RoHS. Removable Carrier Houses One or Two 2.5" Drives Heavy-Duty Stainless Steel Construction 2-Drive Support RAID-1 Mirroring or RAID-0 Striping * Thermal Testing DataPort 25 thermal testing was performed in a standard PC chassis. Two 7200 RPM IDE drives were installed in a DP25 carrier. An Iometer test was run to simulate a high-demand file server application. Temperatures were measured on the motors of both drives and the top of the upper drive. Highest temperatures were found on the drive motors. After two hours, 47.1 degree C was measured on the upper drive motor. Subsequent measurements hovered around 46C. To ensure accurate results, testing continued until after the drive temperatures had stabilized. After five hours of continuous testing, hard drive temperatures remained well below the drive manufacturer's specification for maximum operating temperature of 55.0 degree C. -- SPECIFICATIONs ----------------------------------- DRIVE CARRIER - Supports one or two 9.5mm low-profile drives CONSTRUCTION - Heavy-duty stainless steel and die cast metal construction INTERCONNECT - Rated at 25,000+ insertions CONNECTOR - Standard floppy power connector for ease of install DIMENSIONS - 79mm W x 26mm H x 133mm D www.cruinc.com