Serial Interface |
Interface |
Software-selectable RS232,
RS422 or RS485 (2 and 4 wire support) |
Connectors |
1 DB25F DCE serial port |
Data Rates |
Software-selectable baud rate from 300 to
230 KBaud |
Serial Line Format |
Characters |
7 or 8 data bits |
Parity |
odd, even, none |
Stop Bits |
1 or 2 |
Flow Control |
Control Signals |
CTS/RTS (Hardware) |
Flow Control |
XON/XOFF (Software) |
Network Interface |
Interface |
10Base-T/100Base-TX Ethernet port |
- Software selectable Ethernet speed 10/100/Auto
- Software selectable Half/Full/Auto duplex
|
Connector |
RJ45 |
Standards |
ARP, UDP, TCP, ICMP, Telnet, TFTP, AutoIP,
DHCP, HTTP, SNMP TCP, UDP, and Telnet, TFTP |
Indicators (LED) |
- Power, 10/100 Link/Activity (green)
- 100/100 Link/Activity (green)
- Diagnostics (red)
- Status (green)
|
Processor |
CPU |
Lantronix DSTNI-EX 48 MHz clock |
Memory |
256 KB zero wait state SRAM, 2 MB Flash |
Management |
- Lantronix DeviceInstaller GUI, Serial login, SNMP, Telnet
login, HTTP
|
Power |
UDS1100
- 9-30 VDC or 9-24 VAC on barrel connector (1.5 Watts maximum
consumption)
- 9-30 VDC on DB25F serial interface
UDS1100-PoE
- Powered over Ethernet via 802.3AF compliant power source
|
Environmental |
Operating |
0° to 60° C (32° to 140° F) |
Storage |
-40° to 85° C (-40 to 185° F) |
Agency Approvals |
- UL, CSA, FCC, CE, TUV, CTick, VCCI
|
Software |
- Windows® 98/ME/NT/2000/XP-based DeviceInstaller
configuration software, Com Port Redirector™ software and related
utilities
|
Packaging |
Material |
Metal enclosure with integrated wall
mounts; optional 35 mm DIN-rail mount available |
Dimensions (LxWxH) |
9.0 x 6.4 x 2.3 cm (3.5 x 2.5 x 0.9 in) |
IP Rating |
30 |
Emissions |
FCC Part 15 Subpart B
Class A |
Radiated Emissions 30MHz
– 1000MHz |
ICES-003 Issue 4 February 2004 Class
A |
Radiated Emissions 30MHz – 1000MHz |
AS/NZS CISPR 22: 2004 Class A |
Radiated Emissions 30MHz – 1000MHz |
EN55022: 1998 + A1: 2000 + A2: 2003
Class A |
Radiated Emissions 30MHz – 1000MHz |
VCCI V-3/2005.04 Class A |
Radiated Emissions 30MHz – 1000MHz |
EN61000-3-2: 2000 Class A |
Harmonic Current Emissions |
EN61000-3-3: 1995 + A1: 2001 |
Fluctuations and Flicker |
|
Immunity |
EN55024: 1998 |
+A1: 2001 +A2: 2003 |
IEC_61000-4-2: 1995 |
ESD 8kV Air Discharge (Direct), 4kV
Contact Discharge (Direct/Indirect) |
IEC_61000-4-3: 1995 |
Radiated Immunity 3.0V/m, 1KHz AM
Sine Wave at 80% |
IEC_61000-4-4: 1995 |
EFT/Burst 1.0kV Power Lines, 0.5kV
I/O Lines |
IEC_61000-4-5: 1995 |
Surge Immunity 1.0kV Common Mode, 1.0
kV Differential Mode |
IEC_61000-4-6: 1996 |
Conducted Immunity 3.0 Vrms, 80% AM
Modulated (1KHz) |
IEC_61000-4-8: 1993 |
Magnetic Field Immunity 50Hz 1.0
Arms/m |
IEC_61000-4-11: 1994 |
Voltage Dips and Interrupts
(>95%,0.5 periods), (30%,25 periods), (>95%,250 periods) |
|
Isolation |
- Designed with protection against transients and ESD for use
under harsh environments.
|
Serial Port |
15 kV ESD protection on RS232 and RS422/485
transceivers |
Power Input |
Up to non-repeated 600 W 10/100 usec pulse
protection against transient over voltages |
Ethernet Port |
1500 VAC isolation shielded with shield
connected to chassis ground for signal integrity and ESD protection |