MODEL- SMART500RT1U VENDOR- TRIPPLITE
FEATURES- SmartPro Rack/Tower UPS System- Black finish
Intelligent, line-interactive network power management system.
500VA line interactive 1U rack/tower UPS system; 6 outlets with 1
switchable load bank; Simultaneous communications via SNMPWEBCARD
slot, USB and DB9 serial ports; Included PowerAlert UPS monitoring
software manages an unlimited number of network UPS systems;
Built-in voltage regulation corrects brownouts to 90V; $250,000
Ultimate Lifetime Insurance (USA & Canada only).
Tripp Lite's SMART500RT1U intelligent, line interactive rack/tower
uninterruptible power supply prevents data loss, downtime and
equipment damage due to power outages, voltage fluctuations and
Requires only one rack space (1U) in a 2 or 4 post rack, with
included accessories for upright tower placement. Large internal
batteries offer 17 minutes half load runtime and 5 minutes at full
load. Maintains regulated 120V nominal output without using battery
power during brownouts as low as 90V. 500VA/300 watt power handling
capability is compatible with networking, telecom and other
sensitive electronic applications.
Includes a total of 6 outputs with a single pair of outlets that can
be individually controlled via software interface to reboot select
equipment on demand or automatically shed less significant loads to
extend battery runtime for more critical equipment. Supports
simultaneous remote monitoring of UPS and site power conditions via
built-in USB and DB9 monitoring ports. Includes PowerAlert UPS
monitoring and unattended shutdown software with complete cabling.
Built-in accessory slot supports SNMP with optional SNMPWEBCARD
adapter. Emergency Power Off (EPO) interface offers option for
instantaneous power-off of UPS and connected equipment in the case
of fire or emergency situation. Multi-function audible alarms and
set of 5 front panel LEDs offer at-a-glance notification of UPS and
line power status. Network-grade AC surge suppression protects
equipment from damage and performance problems resulting from
transient surges and line noise. Attractive all-black color scheme.
Find the TrippLite UPS appropriate for your needs. Try the TrippLite UPS Sizing Guide Today.
Includes SMART500RT1U UPS System, Mounting hardware, Cabling for USB &
DB9 monitoring and EPO switching, PowerAlert unattended shutdown and
UPS/Power monitoring software, Warranty information and instruction
* SMART500RT1U line interactive UPS offers battery derived sine wave AC
output during power outages, voltage regulation during brownouts, plus
network-grade AC surge suppression.
* 500VA/300 watt power handling capability compatibile with networking,
telecom and other sensitive electronic devices.
* Supports 1U rackmount installation in 2 or 4 post rack enclosures,
upright tower placement also supported - mounting accessories included.
* Large internal batteries offer runtimes of 17 minutes at half load
(250VA/150 watts) and 5 minutes at full load (500VA/300 watts).
* Maintains regulated 120V nominal output during brownouts as low as 90V.
* Includes 6 UPS-supported outlets, with one pair of individually
controllable outlets that can be powered off and back on again via
* PowerAlert UPS monitoring and unattended shutdown software enables
configurable network broadcast messaging, pager & email notification,
event logging and running user-defined script commands.
* Offers simultaneous monitoring by up to 3 directly-connected devices
through included USB, DB9 and SNMP* interfaces (*requires optional
SNMPWEBCARD), or the monitoring of any number of additional UPS systems
over IP with included PowerAlert monitoring software. Free PowerAlert
enterprise management software is also available for select
* Communications ports support messaging of UPS and line power status,
including on-battery, low-battery, power restored, AC line voltage, DC
battery voltage and remaining battery capacity.
* Supports timed inverter shutoff after unattended shutdown, activate self-
test and UPS output power control for scheduled or immediate reboot of
* Supports Tripp Lite's WatchDog software application to restore
unresponsive programs by systematically restarting applications,
operating systems and ultimately rebooting completely locked computers by
momentarily switching UPS power off and back on again (requires optional
* Built-in accessory slot supports SNMP with optional SNMPWEBCARD adapter.
* Emergency Power Off (EPO) interface with cable.
* Multi-function audible alarms and set of 5 front panel LEDs.
* Network-grade AC surge suppression.
* Attractive all-black color scheme.
* UPS battery set ships fully assembled and ready for installation, no time
consuming connection of internal batteries by user is necessary.
* Two year warranty with $250,000 connected equipment insurance (USA &
-- SPECIFICATIONs -------------------------------------
OUTPUT- Output volt amp capacity (VA): 500
Output watt capacity (watts): 300
Output nominal voltage: 120V
Output voltage regulation: LINE MODE : Sine wave line voltage
120V (-15% +13%)
BATTERY MODE: PWM sine wave output
within 10% of 120V.
Output frequency regulation: LINE MODE, Passes line frequency of
60Hz +/-10%; BATTERY MODE, Inverter
output regulated to 60Hz +/-1 Hz.
Outlet quantity/type: (6) NEMA 5-15R receptacles
Custom load management receptacles: Includes 1 load bank of 2 outlets
that support automated load
shedding and remote reboot on
demand of locked network devices.
Configurable via PowerAlert software
to automatically switch off
optional loads, like monitors, to
increase available runtime for
servers and other critical devices.
Overload protection: Via 15A input breaker
INPUT - Input amps : 5.6A
Input connection : NEMA 5-15P
Input cord length : 10 ft., 14 gauge
Electrical service: 15A 120V recommended
BATTERY- Full load runtime : 5 minutes (500VA)
Half load runtime : 17 minutes (250VA)
DC system voltage : 12 VDC
Typical battery lifespan: 3-6 years, depending on usage
Battery recharge rate: 2-4 hours to 90%
Battery Access: Allows hot swap battery replacement without
powering connected equipment off.
Voltage regulation : Line interactive voltage regulation system
corrects brownouts as low as 90 volts back to
usable 120V nominal levels.
Brownout correction : Input voltages between 90 and 108 are boosted
LEDS ALARMS & SWITCHES-
Front panel LEDs: 5 front panel LEDs - Green POWER LED, 3 color BATTERY
CHARGE LED, 3 color OUTPUT LOAD LEVEL LED, red BATTERY
Alarms: Audible alarm warns of power failure, overload, UPS
fault and low battery conditions.
Switches: Includes 2 front panel mounted push-button switches for
system enable, self-test and alarm cancel functions.
AC surge suppression : 1800 joules
AC suppression response time: Instantaneous
EMI/RFI AC noise suppression: Yes
Network monitoring port: Includes 2 built-in monitoring ports, 1 USB &
1-DB9. Each supports on battery, low battery,
power restored, AC line voltage, DC battery
voltage, load percentage, battery charge
current, battery capacity, internal UPS
temperature and line frequency status
messaging. Interface supports timed inverter
shutoff after unattended shutdown, activate
self-test and 10 second reboot of connected
equipment. Supports reboot of all connected
devices at once or individual load banks via
software interface. Compatible with Tripp
Lite's PowerAlert and WatchDog software.
Software and cabling: Includes PowerAlert UPS monitoring software
for network and standalone operating systems.
Ships with complete USB and DB9 cabling.
SNMP compatibility: Built-in accessory slot accommodates internal
SNMP/Web card and other network accessories.
WatchDog compatibility: Yes, compatible with Tripp Lite's WatchDog
system service to restore operation to locked
equipment through soft reboot of application/
OS or hard power off/on reboot of connected
equipment - ideal for unattended kiosk
LINE/BATTERY TRANSFER -
Transfer time from line power to battery mode: 2-4 milliseconds
Low voltage transfer to battery power: 9V0 (resets to line power
as line voltage increases
to 94V or higher).
High voltage transfer to battery power: 136V (resets to line power
as line voltage decreases
to 132V or lower).
EPO PORT - Includes RJ11 EPO (emergency power off) port and cable.
TVSS GROUND- Includes back panel grounding point with thumbscrew for data
line surge suppressors and other network accessories
requiring a safe grounding point.
COLD START - Yes, inverter can be "cold started" to enable temporary AC
output during a power failure.
MATERIAL - Steel construction
FORM FACTOR- Supports 1U rackmount and upright tower compatible.
ENVIRONMENT- Operating Temperature: +32 to +104 degrees Fahrenheit
Storage Temperature: +5 to +122 degrees Fahrenheit
Relative Humidity: 0 to 95%, non-condensing
Line mode BTU/hr. (Max.): 65.1
Battery mode BTU/hr. (Max.): 437.1
APPROVALS - UL1778 (USA), cUL (Canada), FCC Class B (emissions), NOM
SIZE- 17.5"w x 1.75"h x 11.75"d WT.- 18.8 lbs.